EZ-PD™ CMG2 USB-C EMCA controller with EPR

EMCA controller with VBUS-to-CC short protection for passive USB-C cables

anchor

Overview

EZ-PD™ CMG2 is Infineon's dedicated electronically marked cable assembly (EMCA) controller targeting passive non-thunderbolt and thunderbolt Type-C cables. It offers integrated VBUS-CC short protection up to 54 V, VBUS-VCONN short protection up to 54 V, power delivery 3.1, Type-C 2.1, and ESD protection, all these in a compact 9-ball WLCSP package. EZ-PD™ CMG2 has a 47-byte storage space for vendor- and cable-specific configuration data.

Key Features

  • Supports USB PD 3.1 specification
  • Supports USB-C spec version 2.1
  • Supports USB4, TBT4, & EPR protocol
  • Up to 54 V protection on CC pin
  • Up to 54 V protection on VCONN1 pin
  • Up to 54 V protection on VCONN2 pin
  • 47 bytes for configuration data
  • IEC ESD protection on VCONN and CC
  • Package: 9-ball WLCSP

Products

About

Supports VBUS protection on CC and VCONN pins

EZ-PD™ CMG2‘s CC and VCONN are tolerant to high-voltage VBUS up to 54 V, providing a robust single-chip EMCA solution and thereby reducing the BOM cost.

System IEC ESD integrated

EZ-PD™ CMG2 integrates ±8 kV contact discharge and ±15 kV air gap discharge based on IEC 61000-4-2 level 4C, offering high-level system reliability.

Easy to use, faster design

EZ-PD™ CMG2’s integrated 47-byte storage is configurable over a Type-C interface and allows the storage of vendor-, device-, and cable-specific configuration data. The fact that no firmware development is needed leads to a shorter development cycle.

Supports VBUS protection on CC and VCONN pins

EZ-PD™ CMG2‘s CC and VCONN are tolerant to high-voltage VBUS up to 54 V, providing a robust single-chip EMCA solution and thereby reducing the BOM cost.

System IEC ESD integrated

EZ-PD™ CMG2 integrates ±8 kV contact discharge and ±15 kV air gap discharge based on IEC 61000-4-2 level 4C, offering high-level system reliability.

Easy to use, faster design

EZ-PD™ CMG2’s integrated 47-byte storage is configurable over a Type-C interface and allows the storage of vendor-, device-, and cable-specific configuration data. The fact that no firmware development is needed leads to a shorter development cycle.

Documents

Documents

Design resources

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community ", "labelEn" : "Ask the community " }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions ", "labelEn" : "View all discussions " } ] }